Payment & Shipping Terms:
|Material:||EVA And Viscosity Resin||Appearance:||Light Yellow|
|SOFTEN POINT:||≥82℃ GB/T15332-1994||PEELING STRENGTH:||≥85N/2.5CM GB/T2790-1995|
Industrial Hot Melt Adhesive,
Pressure Sensitive Adhesive Glue
Light Yellow Granule EVA And Viscosity Resin Hot Melt Adhesive For Papers Fixation Of Flat Back Album
|Properties Specifications Test Methods|
|BASE||EVA and Viscosity resin|
1. Should be applied by 2-component spray gun.
2. Coverage: depending on the porosity of substrates, test is needed.
3. Substrate surface should be dry and oil or grease free.
4. Contact: Immediately after the application
5. Open time: Approx. 10 ~ 20 min.
6. Assembly: Pressure may be needed by manual or mechanical methods to enhance the initial bonding.
7. Final bonding strength test: 2 to 24 hours after bonding assembly, make sure the bonded adhesive is
fully cured and dried.
Great sealing performance
Mainly for pocket air filter
EVA based hot melts are the most widely used form of Hot Melt and are an economical option for case sealing applications. Adhesives Specialists is known for having the highest quality EVA Hot Melts – for the lowest price in the industry.
Contact Person: Sunny Liu